Detalhe: | Catalyst 6500 16 port 10 Gigabit Ethernet w/ DFC3CXL(req X2) |
Modelo: | WS-X6716-10G-3CXL |
Condição: | Usado |
Relacionado: | |
Garantia: |
1 Year-Warranty
100% de devolução do dinheiro
Serviço Pós-Venda Grátis
|
Transporte: |
Transporte Aéreo para
Estados Unidos
, A maioria dos clientes recebe durante 5-7 dias
?
Se você terminar o pagamento hoje,
Seu pedido chegará dentro do prazo estimado de entrega. |
Navios para:
10.0
|
2-7 Dias
US$
|
Pagamento: |
Mais
|
(Nota: Cisco desconto e estoque sempre mudou, vamos tentar a maioria dos esforços para segui-lo, mas não pode garantir que cada web was alterado em conformidade. Então nosso serviço de produtos entrará em contato com você após a ordem se atender a tal condição especial.)
WS-X6716-10G-3CXL consists of 16 X2 10 Gigabit Ethernet fiber ports line card module for Cisco Catalyst 6500 series only. WS-X6716-10G-3CXL equipped with WS-X6716-10G and WS-F6700-DFC3CXL and primarily designed for Supervisor Engine 720 with 3CXL daughter card to support Cisco 6500 Virtual Switching System (VSS) 1440. WS-X6716-10G-3CXL is ideally suited for LAN campus aggregation and data center access. Users can configure 4 port groups of 4 ports each, each port group in either oversubscription mode or performance mode. In performance mode, up to 4 10 Gigabit Ethernet ports can be used to create a virtual switch link in a VSS.
Código do produto | WS-X6716-10G- 3CXL |
Característica | 16-Port 10GbE Fiber Module |
Portas | 16 |
Optics | X2 |
Switch fabric connection | 40 Gbps (80 Gbps full duplex) |
Excesso | 4:1 |
Forwarding engine | ● WS-X6716-10G-3CXL: equipped with DFC3CXL for distributed forwarding, supporting 1 million routes |
Filas | Oversubscription mode: ● Receive: 1p7q2t per port ● Transmit: 1p7q4t per port group Performance mode: ● Receive: 8q4t per port ● Transmit: 1p7q4t per port |
Queuing mechanisms | ● CoS-based queue mapping ● DSCP-based queue mapping |
Scheduler | Oversubscription mode: ● DWRR ● WRED Performance mode: ● DWRR ● WRED ● SRR at egress |
Port buffers | Oversubscription mode: ● 90 MB per port group Performance mode: ● 200 MB per port |
Hardware-based multicast replication (Layer 2) | ● Ingress and egress ● Approximately 20 GB per replication engine ● 2 replication engines per module |
Hardware-based multicast replication (Layer 3) | ● Ingress and egress ● Approximately 20 GB per replication engine ● 2 replication engines per module |
Jumbo frame support for bridged and routed packets | Até 9216 bytes |
Maximum port density per chassis | 130 ports (9-slot chassis) |
Maximum port density per VSS | 260 ports |
Can be used to form virtual switch link | ● Performance mode: Yes (supported in a subsequent software release) ● Oversubscription mode: No |
Supervisor de mecanismos suportados | Cisco Catalyst 6500 Series Virtual Switching Supervisor Engine 720 with 10GE uplinks or Supervisor Engine 720 with any PFC (chassis will work in lowest common denominator mode) |
Chassis supported | ● Any Cisco Catalyst 6500 E-Series chassis, including 6503-E, 6504-E, 6506-E, 6509-E, 6509-V-E, and C6509-NEB-A chassis with dual fan tray (NEBS compliant: operating temperature up to 55°C), or; ● Non-E-Series chassis with fan tray 2, including Cisco Catalyst 6506, 6509, 6513, and C6509-NEB-A with single fan tray (non-NEBS compliant: operating temperature up to 40°C) ● Not supported in Cisco Catalyst 6503 non-E Series chassis and 7600 Series chassis |
Slot requirements | ● Can occupy any slot in any Cisco Catalyst 6503-E, 6504-E, 6506, 6506-E, 6509, 6509-E, 6509-V-E, or 6509-NEB-A chassis ● Can occupy only slots 9 through 13 in a Cisco Catalyst 6513 chassis |
Onboard memory | 1 GB default |
Do you have any question about the WS-X6716-10G-3CXL?
Contacte-nos agora via [email protected]
Standard protocols | IEEE 802.1d, IEEE 802.1p, IEEE 802.1q, IEEE 802.1s, IEEE 802.1w, IEEE 802.3x, IEEE 802.3ad, IEEE 802.3ae, IEEE 802.3ak, IEEE 802.3aq, and IEEE 802.3an |
Especificações físicas | ● Occupies one slot in the Cisco Catalyst 6500 Series chassis or Cisco 7600 Series chassis ● Dimensions (H x W x D): 1.2 x 14.4 x 16 in. (3.0 x 35.6 x 40.6 cm) ● Weight: ◦ Cisco Catalyst 6708 and 6716: 13 pounds excluding X2 components; ¼ pound for each X2 ◦ Cisco Catalyst 6704: 10 pounds excluding XENPAK and DFC components; 2/3 pound for each XENPAK |
Condições ambientais | Temperatura de operação: ● Agency-certified for operation: 32 to 104°F (0 to 40°C) ● Design and tested for operation 32 to 130°F (0 to 55°C) ● Storage temperature: –40 to 167°F (–40 to 75°C) ● Relative humidity: 10 to 90 percent, noncondensing Operating altitude: ● Agency-certified for operation: –500 to 6500 ft (–150 to 2000m) ● Designed and tested for operation –500 to 10000 ft (–150 to 3000m) |
Conformidade regulamentar | Cisco Catalyst 6500 Series 10 Gigabit Ethernet modules, when installed in a system, comply with the following EMC and safety standards: EMC Standards: ● FCC Part 15 (CFR 47) Class A ● ICES-003 Class A ● VCCI Classe A ● EN55022 Class A ● EN55024 ● CISPR24 ● CISPR 22 Classe A ● AS/NZS CISPR 22 Class A ● ETS 300 386 ● KN 22 Class A ● EN 50082-1 ● EN61000-3-2 ● EN61000-3-3 ● EN61000-6-1 ● CNS13438 Class A ● KN6100 -4 Series Safety Standards: ● UL 60950-1 ● CAN/CSA C22.2 No. 60950 ●RE88PL99ACE1RE88PL99ACE1EN 60950-1 ●RE88PL99ace1RE88PL99ACE1IEC 60950-1 ● AS/NZS 60950-1 ● IEC 60825 Class 1 ● EN 60825 Class 1 ● 21CFR 1040 |
NEBS criteria levels | SR-3580 Issue 3, June 2007 (GR-63-CORE, issue 3, and GR-1089-CORE, issue 4) |
ETSI | ● ETS 300 019-2-1, Class 1.1 Storage ● ETS 300 019-2-2, Class 2.1 and 2.2 Transportation ● ETS 300 019-2-3, Class 3.1E Stationary Use |
Network management | ● ETHERLIKE-MIB (RFC 1643) ● IF-MIB (RFC 1573) ● Bridge MIB (RFC 1493) ● CISCO-STACK-MIB ●RE88PL99ACE1RE88PL99ACE1CISCO-VTP-MIB ●RE88PL99ACE1RE88PL99ACE1CISCO-CDP-MIB ● RMON MIB (RFC 1757) ● CISCO-PAGP-MIB ●RE88PL99ACE1RE88PL99ACE1CISCO-STP-EXTENSIONS-MIB ● CISCO-VLAN-BRIDGE-MIB ● CISCO-VLAN-MEMBERSHIP-MIB ● ENTITY-MIB (RFC 2037) ● HC-RMON ● RFC1213-MIB (MIB-II) ● SMON-MIB |
Requisitos de energia | ● WS-X6716-10T-3C: 509.3W (12.1A @ 42V) ● WS-X6716-10T-3CXL: 538.7W (12.8A @ 42V) ● WS-X6716-10G-3C: 457.8W (10.9A @ 42V) ● WS-X6716-10G-3CXL: 487.2W (11.6A @ 42V) ● WS-X6708-10G-3C: 444.36W (10.58A @ 42v) ● WS-X6708-10G-3CXL: 473.76w (11.28A @ 42V) ● WS-X6704-10GE with DFC3CXL: 362.46W (8.63A @ 42V) ● WS-X6704-10GE with DFC3C: 333.06W (7.93A @ 42V) ● WS-X6704-10GE with DFC3BXL: 402.36W (9.58A @ 42V) ● WS-X6704-10GE with DFC3B: 377.16W (8.98A @ 42V) ● WS-X6704-10GE with DFC3A: 389.76W (9.28A @ 42V) ● WS-X6704-10GE with CFC: 295.26W (7.03A @ 42V) |
Indicadores | ● Status: green (operational), red (faulty), and orange (module booting) ● Link: green (port enabled and connected), orange (port disabled), and off (port enabled and not connected) |
O que é Garantido.
Depois de receber seu pedido, leve um mês inteiro para experimentá-lo. Se você achar que qualidade não é boa, nós'vai pegá-lo de volta e reembolsar o seu dinheiro. Sua satisfação total é GARANTIDA ou seu dinheiro de volta. Isso's garantido.
Após o seu pedido itens que estão disponíveis. Usaremos a forma de entrega mais rápida para países globais. Normalmente, enviaremos cargas durante 3 a 5 dias. E a entrega internacional levará cerca de 3-10 dias de acordo com a sua localização.
O serviço nunca termina.
Hardwares Warrany Time:
Novo hardware selado original: 3 anos
Dispositivos originais recondicionados/usados: 1 ano
Após o tempo de garantia, você também pode entrar em contato conosco para retornar para o serviço de reparo. Tudo o que você compra da HI-NETWORK.COM. Ofereceremos suporte de serviço on-line vitalício para suas possíveis dúvidas.
DELL usado R740 Rack Server
PoE vs PoE+ vs UPoE: What's the best switch to meet your network needs?
Understanding PoE Standards and Wattage
Power Supply Standards for POE Switches. Why is the Power Supply Distance Limited to 100 Meters?
How to Choose the Right 10G SFP+ Module: SR, LR, or LRM?
Huawei Switches: Comprehensive Guide and Insights
How Does Cisco Wireless Network Work?
How Do I Connect to a Cisco Wireless Router?
Cisco Catalyst 9800 Series Wireless Controller Software Configuration Guide
Cisco Access Point and Wireless Controller Selector